TV Tuner (Analog) Harness Connectors

TV System

TV Tuner (Analog) Harness Connectors

TV Tuner (R78)





A Red 20-pin connector (T20f)
B MOST bus
C TV3/TV4 connection (green) from Antenna Amplifier (R24)/Digital TV Tuner (R171)
D TV1/TV2 connection (brown) from antenna amplifier/digital TV tuner
E FBAS output (green) to Front Information Display Control Head Control Module (J523)

• Unlisted connector terminals are not used.

A - Red 20-Pin Connector (T20f) without RSE





1 Terminal 30
2 Terminal 31
3 Ring-break diagnostic cable
8 Ground shielding 1
9 Ground shielding 1
10 Audio input left 1
11 Audio input right 1
12 Video input 1
13 Ground shielding 1
14 Ground shielding 2
15 Ground shielding 2
16 Audio input left 2
17 Audio input right 2
18 Video input 2
19 Ground shielding 2

A - Red 20-Pin Connector (T20f) with RSE





1. Terminal 30

2. Terminal 31

3. Ring-break diagnostic cable

4. Video output wire to the multimedia control module (J650) (RSE)

5. Audio output wire to the multimedia control module (RSE)

6. Ground shielding (audio)

7. Right audio output wire to the multimedia control module (RSE)

8. Screen ground (video)

9. Ground shielding (audio)

10. Left audio input wire 1 from the multimedia control module (RSE)

11. Right audio input wire 1 from the multimedia control module (RSE)

12. Video input wire 1 from the multimedia control module (RSE)

13. Screen ground 1 (video)

14. Rear screen ground 2 (not used)

15. Rear screen ground 2 (not used)

16. Left audio input wire 2 (not used)

17. Right audio input wire 2 (not used)

18. Video input wire 2 (not used)

19. Rear screen ground 2 (not used)

20. I/O switch PIN wire from the multimedia control module (RSE)

B - MOST Bus





1. Input

2. Output