Sill Panel Cover

Moldings and Trim

Sill Panel Cover





1 - Rear Sill Panel Cover

2 - Nut

• 4 Nm

• 12 per side

3 - Fitting Screw

• 8 Nm

• Installed only on this point.

4 - Bolt

• 1.5 Nm

5 - Sill Panel Cover

• Before removing, front and rear cover removed => [ Cover Strip ]. Cover Strip

• To remove, remove bolts from underside first and then side nuts.

• Also bolt - 6 - on fender bracket.

• Pull off sill panel cover sideways from Tucker bolts first, and then pull out of rear sill panel cover toward front.

6 - Bolt

• 1.5 Nm

7 - Bracket for Fender

• Removal => [ Bracket for Fender ].

8 - Cover Strip for Sill Panel Cover

• Removal => [ Cover Strip ]. Cover Strip

• Gap cover

9 - Gap Cover for Front Door

•

Bracket for Fender