Center Console Storage Compartment (Split Center Armrest), Removing and Installing

Center Console Storage Compartment (split Center Armrest), Removing And Installing

Special tools, testers and auxiliary items required







- Torque wrench V.A.G 1410







1 - Storage compartment
Optionally with handset holder

Removing
- Switch off ignition.
- Swivel center armrest - 5 - upwards.
- Remove upper support trim - 4 -.
- Remove bolts - 6 - (2x).
- Remove center armrest - 5 - from lower support - 8 -.
- Unclip socket - 3 -.
- Unclip storage compartment - 1 -.
- Swivel storage compartment upwards and at the same time pull it in direction of travel out of center console - 10 - or extension for center console - 11 -.
- Disconnect connector on vehicles with handset holder - 2 -.
- Remove storage compartment - 1 -.

Installing
Install in reverse order of removal.

2 - Handset holder
3 - Socket
4 - Upper support trim
5 - Center armrest
6 - Bolts (2x), 18 Nm
- Included in scope of delivery of center armrest
7 - Upper support
- Included in scope of delivery of center armrest
8 - Lower support
9 - Opening for vent
- Center armrest connector is located in opening for vent - 9 -.
10 - Center console with extension
11 - Extension for center console