Center Defroster Vent, Removing and Installing

Center Defroster Vent, Removing And Installing

Special tools, testers and auxiliary items required







- Trim removal wedge 3409
- Feeler gauge

Removing
- Unclip cap - 1 - with 0.35 mm feeler gauge - 2 - from center defroster vent - arrow -.







- Remove Sunlight Photo Sensor G107-Item 3-and disconnect connector.
- Remove bolt - 1 -.







- Remove center defroster vent - 2 - as shown from instrument panel using Trim removal wedge 3409.

Installing
Install in reverse order of removal.

Tightening torque:
Center defroster vent to instrument panel: 2 Nm