Memory Seat Switch, Removing and Installing

Memory Seat Switch, Removing And Installing

Removing

CAUTION:
- Switch off all electrical consumers.
- Switch ignition off and remove ignition key.

- Remove front door trim:
- Remove insulation mat from door trim.







- Remove screws -arrows-.
- Remove speaker panel.







- Disconnect electrical connector -1-.
- Remove screws -arrows- and remove storage compartment from door trim.







- Using a socket head wrench, remove pin -1- for storage compartment locking operation and pin -2- for stop.
- Repeat procedure on opposite side of storage compartment.
- Open storage compartment.







- Remove switch cover -1- -arrows-.







- Lift rear switch -arrow 1- and pull it off toward interior of storage compartment -arrow 2-.







- Disconnect electrical connector.1- at memory seat switch -2-.
- Carefully release catches -arrows- using a small screwdriver.
- Pull out memory seat switch downward from switch mount.

Installing
Install in reverse order of removal.
- Press switch into switch mount until catches engage.