Diagram 30/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Distance Regulation Control Module, Distance Regulation Sensor Heater





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J104 - ABS Control Module (w/EDL) Control Modules Overview

J329 - Power Supply Relay (terminal 15) Overview of Relay Carrier

J428 - Distance Regulation Control Module Control Modules Overview

J533 - Data Bus On Board Diagnostic Interface Control Modules Overview

SB17 - Fuse 17 (on fuse panel B) Component Locations

T17g - 17-Pin Connector, grey, Relay Panel Front footwell left

Z47 - Distance Regulation Sensor Heater

(44) - Ground Connection (on left lower A-pillar)

(375) - Ground Connection 10 (in main wiring harness)

(388) - Ground Connection 23 (in main wiring harness)

(B108) - CAN-Bus Extended High Connection 1 (in main wiring harness)

(B109) - CAN-Bus Extended Low Connection 1 (in main wiring harness)

(B165) - Plus Connection 2 (15) (in interior wiring harness)

(B273) - Plus Connection (15) (in main wiring harness)

• - CAN-Bus (Data-Bus)

* - Vehicles with Distance Regulation Sensor Heater

** - Diagnostic connections

*** - canceled as from 2005 m.y.

# - Output vehicle speed signal

## - from 11.06