Diagram 2/8 (Tracks 85-98)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module, Knock Sensor, Engine Speed Sensor, Engine Coolant Temperature Sensor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G28 - Engine Speed (RPM) Sensor Engine Management Systems Locations

G61 - Knock Sensor (KS) 1 Engine Management Systems Locations

G62 - Engine Coolant Temperature (ECT) Sensor Engine Management Systems Locations

G66 - Knock Sensor (KS) 2 Engine Management Systems Locations

J217 - Transmission Control Module (TCM) Control Modules Overview

J623 - Engine Control Module (ECM) Control Modules Overview

SB12 - Fuse 12 (in fuse holder) Component Locations

SB22 - Fuse 22 (in fuse holder) Component Locations

SB38 - Fuse 38 (in fuse holder) Component Locations

T3c - 3-Pin Connector, grey, on engine speed sensor

T3i - 3-Pin Connector, black, on knock sensor 1

T3k - 3-Pin Connector, brown, on knock sensor 2

T16 - 16-Pin Connector, black, Data Link Connector (DLC)

T17a - 17-Pin Connector, black, in E-Box plenum chamber Connector Stations and Connectors Overview, in E-Box Plenum Chamber

(220) - Ground connection (sensor ground), in engine compartment wiring harness

(D102) - Wire connection -2-, in engine compartment wiring harness

(D166) - K-Diagnosis Wire Connection (in engine wiring harness)

Previous Diagram 2/7 (Tracks 71-84)

Next Diagram 2/9 (Tracks 99-112)