Rear Interior Light/Reading Light With Rear Roof Module Control Head -E467-, Removing and Installing

Rear Interior Light/reading Light With Rear Roof Module Control Head -E467-, Removing And Installing

Special tools and workshop equipment required







- Pry lever 80-200

Removing

CAUTION:
- Switch off all electrical consumers.
- Switch ignition off and remove ignition key.







- Use pry lever 80-200 to carefully pry off cover of interior light/reading light as shown.







- Insert pry lever 80-200 between housing of interior light/reading light and mounting frame in headliner as shown.
- Release retainer tabs -arrows- and take rear interior light/reading light downward out of headliner opening.







- Press retainer tab -1- at multi-pin connector.
- Release catches of connectors -arrow- and disconnect.

Installing
Install in reverse order of removal, noting the following:
- Insert rear interior light/reading light into roof trim and clip in.