Fuse Panel In Right Instrument Panel, Removing and Installing

Fuse Panel In Right Instrument Panel, Removing And Installing

Removing
- Disconnect battery.

WARNING: When working on knee airbag, observe safety precautions for working on airbags.

- Remove glove compartment.







- Remove screws -1- from fuse box -2-.
- Release retainer tabs and remove fuse box from central tube for instrument panel.







- Cut open cable tie -1-.
- Release cover for fuse box -arrows-.
- Remove fuses from fuse box.







- Pull off retaining strip for connectors -arrows- and take connectors from fuse box.
- Disconnect multi-pin connector -1-.

NOTE: Fuse assignments







Installing
Install in reverse order of removal, noting the following:

NOTE: Re-attach all cable ties at the same locations when re-installing.

Reconnect battery.

Tightening torque

Component Nm
Fuse box to instrument panel central tube 3