Procedures

Relay Panel In Right Footwell, Removing And Installing

Removing
- Disconnect battery.

WARNING: When working on knee airbag, observe safety precautions for working on airbags.

- Remove glove compartment.
- Remove A-pillar trim.
- Fold back floor covering.
- Remove foot support.







- Disconnect relay -1-.
- Remove screws -arrows- and remove relay carrier from bulkhead.
- Disconnect relays/fuses from relay carrier.
- Unclip fuse boxes and relay carriers at relay carrier.







NOTE: Fuse/relay assignments

Installing
Install in reverse order of removal, noting the following:
- Reconnect battery.

Tightening torque

Component Nm
Relay carrier to body 9.5