Diagram 2/12 (Tracks 141-154)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module, Secondary Air Injection Pump Relay, Secondary Air Injection Pump Motor, High Pressure Sensor, Secondary Air Injection Solenoid Valve





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G65 - High Pressure Sensor Components Outside Passenger Compartment

J255 - Climatronic Control Module A/C System Control Components Inside Passenger Compartment

J299 - Secondary Air Injection (AIR) Pump Relay Overview of Relay Carrier

J623 - Engine Control Module (ECM) Control Modules Overview

N112 - Secondary Air Injection (AIR) Solenoid Valve

S130 - Fuse for secondary air pump Component Locations

SC9 - Fuse 9 (in fuse holder) Component Locations

T17a - 17-Pin Connector, black, in E-Box plenum chamber Connector Stations and Connectors Overview, in E-Box Plenum Chamber

T17e - 17-Pin Connector, red, in E-Box plenum chamber

V101 - Secondary Air Injection (AIR) Pump Motor Engine Management Systems Locations

(43) - Ground connection, on right A-pillar, lower part

(387) - Ground Connection 22 (in main wiring harness)

(388) - Ground Connection 23 (in main wiring harness)

(B148) - Plus connector -3- (87), in wiring harness interior

(B279) - Plus Connection 3 (15a) (in main wiring harness)

(E7) - Plus connection (87a), in Motronic Multiport Fuel Injection (MFI) wiring harness

Previous Diagram 2/11 (Tracks 127-140)

Next Diagram 2/13 (Tracks 155-168)