Diagram 2/9 (Tracks 99-112)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module, Valve -1- for Camshaft Adjustment, Camshaft Position Sensor, Brake Light Switch, Torque Support Valve





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F - Brake Light Switch Locations

F47 - Brake Vacuum Vent Valve Switch for Cruise Control Locations

G40 - Camshaft Position (CMP) Sensor Engine Management Systems Locations

G163 - Camshaft Position (CMP) Sensor 2 Engine Management Systems Locations

J104 - ABS Control Module (w/EDL) Control Modules Overview

J393 - Central control module for comfort system Control Modules Overview

J518 - Access/Start Control Module Control Modules Overview

J623 - Engine Control Module (ECM) Control Modules Overview

N205 - Valve -1- for camshaft adjustment Engine Management Systems Locations

N208 - Valve -2- for camshaft adjustment Engine Management Systems Locations

N382 - Torque Support Valve

SC8 - Fuse 8 (in fuse holder) Component Locations

T17a - 17-Pin Connector, black, in E-Box plenum chamber Connector Stations and Connectors Overview, in E-Box Plenum Chamber

T17c - 17-Pin Connector, brown, in E-Box plenum chamber Connector Stations and Connectors Overview, in E-Box Plenum Chamber

(220) - Ground connection (sensor ground), in engine compartment wiring harness

(B335) - Connection 1 (54) (in main wiring harness)

(B336) - Connection 2 (54) (in main wiring harness)

(B350) - Plus Connection 1 (87a) (in main wiring harness)

(E16) - Plus connection (5 Volts), in Motronic Multiport Fuel Injection (MFI) wiring harness

(E19) - Wire connection -4-, in Motronic Multiport Fuel Injection (MFI) wiring harness

Previous Diagram 2/8 (Tracks 85-98)

Next Diagram 2/10 (Tracks 113-126)