Procedures

EVAP Canister, Removing And Installing

Removing
Observe safety precautions.
Observe rules for cleanliness.







- Remove EVAP canister cover at bottom of spare wheel well (arrows).







- Disconnect hose connections -1- to -3- at ventilation lines.
- Remove pin bolts (arrows) and remove EVAP canister.

Installing
Installation is the reverse of removal, noting the following:

NOTE: Secure all hose connections using hose clamps appropriate for the model type:

Tightening torques

Component Nm
EVAP canister to chassis 16
Cover at spare wheel well 9