Left Fuel Delivery Unit With Fuel Pump (FP) -G6-, Sender For Fuel Gauge -G- and Fuel Supply Sensor 3 -G237-, Component Overview

Left Fuel Delivery Unit With Fuel Pump (FP) -G6-, Sender For Fuel Gauge -G- And Fuel Supply Sensor 3 -G237-, Component Overview







1 Mount
- For fuel delivery unit
2 Sender for fuel gauge -G-
- Black
- Clipped in on mount -Item 1-
- Checking resistance values
3 Left fuel delivery unit
- With Fuel Pump (FP) -G6-
- Clipped in on mount -Item 1-
- Various versions, allocation
- Fuel Pump (FP) electrical testing
- Checking residual pressure
4 Fuel delivery line
- From suction jet pump, right side
- Clipped in on fuel delivery unit -Item 3-
5 Fuel supply line
- Connector coupling is located on right side of fuel tank
- To disconnect, press release button on connection piece
6 Fuel return line
- Connector coupling is located on right side of fuel tank
- To disconnect, press release button on connection piece
7 Locking ring
- Use ring nut spanner 3087 to remove and install
- Tighten to 120 Nm
8 Left connector flange
- Installation Position See Fig.1
9 Seal
- Always replace
- To install, place into opening of fuel tank when dry
10 Fuel Supply Sensor 3 -G237-
- Gray
- Clipped in on fuel delivery unit -Item 3-
- Checking resistance values

Fig. 1 Installation position of left connector flange







- Insert new, dry seal for connector flange into opening of fuel tank.
- Insert connector flange in fuel tank, note installation position:
The tab -2- on connector flange must lie between tabs -1- and -3- on fuel tank.