Rear Suspension
Special Tools
Special tools, testers and auxiliary items required
• Punch (VW 409)
• Sleeve press tool (VW 522)
• Press block (40-204A)
• Assembly tool (T10065) can also be used instead of (40-204A).
• Adapter plates (2036/1)
• Press support - R&I wheel bearings (3144)
• Hose clamp pliers (VAG 1275)
• Assembly tool (T10065)
• Open end spanner insert AF 10 (VAG 1783/1)
• Assembly device (3291)
• Torque wrench (VAG 1576)
• Torque wrench (VAG 1410)
• CV joint boot clamp tool (VAG 1682)
• - 3 -Kukko separating tool 22-115 mm (17/2)
• Thrust piece (T40089),
• Pliers (3340)
• Adapter (T10157)
• Air suspension strut charger (VAS 6231)
Special tools, testers and auxiliary items required
• Torque wrench (5-50 Nm) (VAG 1331)
• Torque wrench (40-200 Nm) (VAG 1332)
• Engine and transmission jack (VAG 1383A)
• Torque wrench (5-60 Nm) (VAG 1783)
• Wheel hub support (T10149)
Special tools, testers and auxiliary items required
• Subframe support assembly device (3290)
• Assembly device (3292)
• Press piece (3292/3)
• Puller for wheel hub (3349)
• - 2 -2 arm puller (Kukko 20/10)
Special tools, testers and auxiliary items required
• Thrust plate (VW 401)
• Thrust plate (VW 402)
• Thrust disc (VW 412)
• Thrust piece (VW 473)
• Thrust pad (VW 510)
• Press tube (30-100)