Rear Door Window Glass: Service and Repair

Door window, removing and installing

- Door trim removed







- Drive down window to distance - a - is approx. 10 cm and secure against falling off with adhesive tape.
- Remove window regulator motor.







- Remove plastic covers - 1 - from assembly carrier - 2 -.







- Remove Torx bolts - 4 -.
- Remove window regulator motor.
- Slide driver - 3 - of window regulator downward by hand.
- Disconnect all electrical harness connectors.
- Remove assembly carrier.
- Remove window frame.
- Pull door window downward out of guides..
- Installation is performed in the reverse order of removal.