Front Wheelhousing Cover (Allroad), Removing And Installing

Covers

Front Wheelhousing Cover (Allroad), Removing And Installing







5 - Front wheelhousing cover
- Removing:
- Remove front wheel.
- Remove wheelhouse liner.
- Remove screw - 2 - from cover.
- Pull cover off laterally.
- If necessary, remove adhesive residue from fender sealing strip.







- Installing:
- The adhesive surface of sealing strip must be free of dust and grease.
- Remove protective strip from fender contact surface - arrow - of cover.
- Using guide pins, place cover - arrow - into holes of fender.
- Press cover onto fender and secure with screws.
- Further installation occurs in reverse order of removal.
- Following installation, pull adhesive strip off cover beginning at top corner.







6 - Screw
- 1 Nm (9 in.lb)
7 - Front wheelhouse liner
- Removed
8 - Front bumper cover adapter
9 - Front bumper