Upper Control Arm (Allroad Suspension), Removing From Mounting Bracket

Upper control arm (Allroad suspension), removing from mounting bracket
Removing
^ Remove suspension strut first





^ Remove bolts-1-(2x)

Installing





^ Place a straight object -2-, e.g. a ruler, on mounting bracket as shown in illustration.
Dimension -A- = 65 mm ± 2 mm.
Dimension -B- = 49.5 mm ± 2 mm.
Measured from the straight edge to the highest point at control arm.
^ Replace all bolts and nuts.
^ Tighten hex bolts -1- of the two control arms to 50 Nm, then turn another 90°.