Coolant Fan -V7- (Right), Removing and Installing

Coolant Fan -V7- (right), removing and installing

Removing
- Move lock carrier to service position.

Note: All cable ties which are released or cut open when removing must be installed in same position when installing.





- Unscrew bolts -2- and remove radiator fan connector from lock carrier.
- Move wiring clear.
- Unplug electrical connector -1-.
- Unscrew bolts (arrows) and remove radiator fan.

Installing
Install in reverse sequence; note following points:

Note: All cable ties which are released or cut open when removing must be installed in same position when installing.

- Installing lock carrier with attachments:
- Install front bumper
- Install air filter housing.
- Adjust headlights





Tightening torques