Coolant Fan 2 -V177- (Left), Removing and Installing

Coolant Fan 2 -V177- (left), removing and installing
Removing

- Move lock carrier to service position.

Note: All cable ties which are released or cut open when removing must be installed in same position when installing.





- Remove electrical connectors (arrow) from retainer and disconnect.
- Move wiring to radiator fan clear.





- Unscrew bolt -1-.
- Turn electric fan in direction indicated (arrow), and detach.

Installing
Install in reverse sequence, note following points:

Note: All cable ties which are released or cut open when removing must be installed in same position when installing.

- Install lock carrier with attachments
- Install front bumper
- Install air filter housing.
- Adjust headlights.





Tightening torque