Seat Pan Spring Pad With Wiring Harness, Assembly Overview

Seat Pan Spring Pad With Wiring Harness, Assembly Overview







1 - Cable ties (4x)
2 - Spring pad with wiring harness
- Removing
- Remove seat.
- Attach fixture for seat repair VAS 6136 to engine and transmission holder VAS 6095.
- Attach front seat to fixture for seat repair VAS 6136.
- Remove side trim, outboard side.
- Remove side trim, inboard side.
- Remove backrest.
- Remove cover and padding from seat pan.
- Remove cable tie - 1 - (4x).
- Disengage spring pad - 2 - at positions - A - (2x).
- Disengage spring pad - 2 - at positions - B - (4x).
- Place seat to side.
- Disconnect connectors - 3 - (3x).
- Remove bolt - 5 -.
- Remove spring pad with wiring harness - 2 -.
- Installing
- Installation is in reverse order of removal.
3 - Connector (3x)
4 - Shim
5 - Bolt