Engine, Securing to Assembly Stand

Engine, securing to assembly stand (vehicles with manual transmission)

Special tools, testers and auxiliary items required





^ Shackle 10-222 A/12
^ Engine sling 3033
^ Engine and transmission holder VAS 6095 with bracket VAS 6095/1-6 and universal mounting VAS 6095/1
^ Workshop crane VAS 6100
^ Lift arm extension for workshop crane VAS 6101

Special tools, testers and auxiliary items required





^ Additional hooks (2) 10-222 A/2





Work sequence
- Remove wiring harness bracket at right engine console - arrows -.





- Disconnect electrical harness connector - 1 - at right engine mount.
- Remove bolts - arrows - and remove right engine mount.

Note: Shown without engine bearing console for clarity.

- Repeat work procedure on opposite side of vehicle.





- Disconnect vacuum hose - 1 -.
- Disconnect air guide hose - 2 - from throttle valve control module.





- Secure shackle 10-222 A/12 to right rear engine lifting eyelet.
- Hook additional hook 10-222 A/2 on shackle 10-222 A/12.





- Engage engine sling 3033 on additional hook 10-222 A/2 and on workshop crane VAS 6100 with lift arm extension for workshop crane VAS 6101 as shown in illustration.
- Lift engine from support elements of scissor lift platform VAS 6131.





- Secure engine using bracket VAS 6095/1-6 and universal mounting VAS 6095/1 to engine and transmission holder VAS 6095 as shown in illustration.