Mode 9: Vehicle Information

Mode 9: Vehicle Information

In this diagnostic mode, vehicle specific diagnostic data such as e.g. the control module versions will be displayed.

Test requirement:
- No DTCs in DTC memory; check DTC memory see "Mode 3: Check DTC memory". Mode 3: Check DTC Memory

Procedure
- Connect diagnostic tester.
- Switch ignition on.
- In diagnostic function "33 - OBD", select "Mode 9: vehicle information".
- Using the following table, select the desired vehicle information according to Test-ID (Test Identification).

Display vehicle information







- End diagnosis and switch ignition off.