Diagram 67/7 (Tracks 71-84)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Mass Air Flow (MAF) Sensor, Coolant Circulation Pump Relay, Valves for camshaft adjustment





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G70 - Mass Air Flow (MAF) Sensor Locations

J151 - Coolant Circulation Pump Relay Locations

J220 - Motronic Engine Control Module (ECM) Common Modules Overview

J234 - Airbag Control Module Common Modules Overview

N80 - Evaporative Emission (EVAP) Canister Purge Regulator Valve Locations

N205 - Valve -1- for camshaft adjustment Locations

N208 - Valve -2- for camshaft adjustment Locations

T17d - 17-Pin Connector, red, connector station E-box, plenum chamber Connector Station

V51 - After-Run Coolant Pump Locations

V144 - Leak detection pump (LDP) Locations

(121) - ground connection -2-, in right front wiring harness

(A125) - Connection (contact switch in rear lid) in instrument panel wiring harness

(D22) - Connector (over fuse 234), in wiring harness front, right

(E7) - Connection (87a) in Motronic wiring harness

* - Hot climates only

** - Manual transmission or automatic transmission only

*** - Automatic transmission (AG6) only

**** - not for all equipments

Previous Diagram 67/6 (Tracks 57-70)

Next Diagram 67/8 (Tracks 85-98)