Diagram 67/9 (Tracks 99-112)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Camshaft Position (CMP) Sensors, Knock sensors





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G40 - Camshaft Position (CMP) Sensor Locations

G163 - Camshaft Position (CMP) Sensor 2 Locations

G198 - Knock sensor 3 Locations

G199 - Knock sensor 4 Locations

J220 - Motronic Engine Control Module (ECM) Common Modules Overview

T3b - 3-Pin Connector, blue, on engine block

T3g - 3-Pin Connector, black, on engine block

(104) - Ground connection, in right front wiring harness (sensor Grounds)

(220) - Ground connection (sensor ground), in engine compartment wiring harness

(D141) - Connector (5V), in wiring harness, engine pre-wiring

Previous Diagram 67/8 (Tracks 85-98)

Next Diagram 67/10 (Tracks 113-126)