Avant (Wagon)

Rear Lid, Removing And Installing

Removing
- Remove rear lid trim.
- Disconnect or remove electrical harness connectors and hose for rear window washer system.
- Prop up and secure rear lid in open position.







- Using screwdriver, lift retaining spring - 3 - as shown and remove gas-filled strut - 1 - from upper ball stud - 2 -.







- Remove cover - 1 - for rear lid hinge and cable guide - 2 - from rear lid hinge - arrows -.







- Remove bolts - arrows - at left and right.
- Second technician is needed to support and lift hood during removal.
- Remove rear lid.

Installing
Installation is the reverse of removal, noting the following:
- When installing, tightening torque 21 Nm.
- Adjusting rear lid.