Navigation System

Navigation System With CD Drive Control Module J401, Multi-pin Connector Assignments

Navigation System with CD Drive Control Module J401, rear view







1. Connection for Navigation System Antenna R50
2. Retainer for antenna connection
3. Multi-pin connector I, 20-pin
4. Fuse
5. Multi-pin connector II, 8-pin, brown
6. Multi-pin connector III, 8-pin, black
7. Multi-pin connector IV, 10-pin, red

Navigation System with CD Drive Control Module J401, Multi-pin connector assignments

NOTE: Terminals which are not listed are vacant/unassigned.







Multi-pin connector I, 20-pin, black
2. CAN-Bus High (Infotainment)
5. CAN-Bus Low (Infotainment)
13. Low Frequency (LF) (+) to Radio R
14. LF mute to Radio R
15. LF (-) to Radio R
16. LF (+) from Telephone (where applicable)
17. LF mute - Telephone (where applicable)
18. LF screen from Telephone (where applicable)
19. LF (-) from Telephone (where applicable)







Multi-pin connector III, 8-pin, black
1. Vehicle speed signal
2. Line output from Back-Up Light Switch F4
3. Data Link Connector (DLC)
4. Terminal 15
7. Battery positive (B+) - Terminal 30
8. Ground (GND) - Terminal 31