Diagram 12/4 (Tracks 29-42)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Motronic Engine Control Module (ECM), Motronic Engine Control Module (ECM) Power Supply Relay, Fuses





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J220 - Motronic Engine Control Module (ECM)

J271 - Motronic Engine Control Module (ECM) Power Supply Relay

J293 - Coolant FC (Fan Control) Control Module

J671 - Coolant FC (Fan Control) Control Module 2 Locations

S4 - Fuse

S229 - Fuse in fuse holder

S282 - Engine Electronics Fuse

S286 - Automatic Transmission After-Run Fuse

T4y - 4-Pin Connector, black, engine compartment

T6n - 6-Pin Connector, on Coolant FC (Fan Control) Control Module 2

T6o - 6-Pin Connector, on Coolant FC (Fan Control) Control Module

T10d - 10-Pin Connector, grey, connector station A-pillar, left

T17d - 17-Pin Connector, red, connector station E-box, plenum chamber

T17e - 17-Pin Connector, white, connector station E-box, plenum chamber

(12) - Ground connection, in engine compartment, left Component Locations Overview in engine Compartment

(83) - Ground connection -1-, in right front wiring harness

(121) - ground connection -2-, in right front wiring harness

(D50) - Plus connection (30), in engine compartment wiring harness

* - Automatic transmission (AG6) only

Previous Diagram 12/3 (Tracks 15-28)

Next Diagram 12/5 (Tracks 43-56)