Diagram 12/12 (Tracks 141-154)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Motronic Engine Control Module (ECM), Secondary Air Injection (AIR) Pump Motor, Engine Coolant Level (ECL) Warning Switch, Valve for exhaust flap, Engine Coolant Temperature (ECT) Sensor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F66 - Engine Coolant Level (ECL) Warning Switch Locations

G2 - Engine Coolant Temperature (ECT) Sensor

G62 - Engine Coolant Temperature (ECT) Sensor Locations

J220 - Motronic Engine Control Module (ECM)

J299 - Secondary Air Injection (AIR) Pump Relay Locations

N220 - Valve for exhaust flap

S130 - Fuse for secondary air pump

T10 - 10-Pin Connector, black, connector station E-box, plenum chamber

T17d - 17-Pin Connector, red, connector station E-box, plenum chamber

V101 - Secondary Air Injection (AIR) Pump Motor Locations

(12) - Ground connection, in engine compartment, left Component Locations Overview in engine Compartment

(220) - Ground connection (sensor ground), in engine compartment wiring harness

(269) - Ground connector (sensor ground) -1-, in instrument panel wiring harness

(327) - Sensor Ground Connection (in engine compartment wiring harness)

Previous Diagram 12/11 (Tracks 127-140)

Next Diagram 12/13 (Tracks 155-168)