Diagram 12/6 (Tracks 57-70)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Motronic Engine Control Module (ECM), Secondary Air Injection (AIR) Solenoid Valve, Injectors, Electro-Hydraulic Engine Mount Solenoid Valve





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J220 - Motronic Engine Control Module (ECM)

J293 - Coolant Fan Control (FC)Control Module

J671 - Coolant Fan Control (FC) Control Module 2 Locations

N85 - Cylinder 7 Fuel Injector Locations

N86 - Cylinder 8 Fuel Injector Locations

N112 - Secondary Air Injection (AIR) Solenoid Valve Locations

N144 - Left Electro-Hydraulic Engine Mount Solenoid Valve Locations

N145 - Right Electro-Hydraulic Engine Mount Solenoid Valve Locations

N156 - Intake Manifold Tuning (IMT) Valve Locations

T4y - 4-Pin Connector, black, engine compartment

T6n - 6-Pin Connector, on Coolant FC (Fan Control) Control Module 2

T6o - 6-Pin Connector, on Coolant FC (Fan Control) Control Module

T10a - 10-Pin Connector, brown, connector station E-box, plenum chamber

T10d - 10-Pin Connector, grey, connector station A-pillar, left

T17d - 17-Pin Connector, red, connector station E-box, plenum chamber

(D22) - Connection (over Fuse 234) (in right front wiring harness)

(D95) - Injectors Connection (in engine compartment wiring harness)

Previous Diagram 12/5 (Tracks 43-56)

Next Diagram 12/7 (Tracks 71-84)