Diagram 12/7 (Tracks 71-84)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Motronic Engine Control Module (ECM), Valves for camshaft adjustment, After-Run Coolant Pump, Mass Air Flow (MAF) Sensor, Evaporative Emission (EVAP) Canister Purge Regulator Valve, Leak detection pump (LDP)





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G70 - Mass Air Flow (MAF) Sensor Locations

J151 - Coolant Circulation Pump Relay

J220 - Motronic Engine Control Module (ECM)

J234 - Airbag Control Module

N80 - Evaporative Emission (EVAP) Canister Purge Regulator Valve Locations

N205 - Valve -1- for camshaft adjustment Locations

N208 - Valve -2- for camshaft adjustment Locations

T17d - 17-Pin Connector, red, connector station E-box, plenum chamber

V51 - After-Run Coolant Pump

V144 - Leak detection pump (LDP) Locations

(121) - ground connection -2-, in right front wiring harness

(A125) - Connection (crash signal) in instrument panel wiring harness

(D22) - Connector (over fuse 234), in wiring harness front, right

(E7) - Connection (87a) in Motronic wiring harness

* - Hot climates only

** - Manual transmission only

*** - Automatic transmission (AG6) only

**** - discontinued from 2003 m. y. (phased in modification)

Previous Diagram 12/6 (Tracks 57-70)

Next Diagram 12/8 (Tracks 85-98)