Ribbed Belt Drive For Generator, Component Overview

Ribbed belt drive for Generator, component overview





1 - 22 Nm
2 - 22 Nm
3 - Ribbed belt tensioner
4 - 22 Nm
5 - Generator
6 - M8 - 22 Nm; M10 - 46 Nm
7 - Alignment bushing
^ For generator bracket
^ 2 pieces

8 - Generator bracket
9 - 10 Nm
10 - Idler roller holder
11 - Vibration damper
12 - 22 Nm plus an additional 45° ( 1/8 turn)
^ Replace

13 - Idler roller for ribbed belt
14 - 22 Nm
15 - Cover cap
16 - Ribbed belt
^ Check for wear
^ Do not kink
^ Before removing, mark direction of rotation using chalk or felt-tip marker Reversing the direction of rotation of a run-in belt can destroy belt
^ When installing ribbed belt, make sure it is seated correctly on pulleys

17 - Threaded bushing