Roll Bar Flanges, Removing

Roll Bar Flanges, Removing







1 - Rollover bar flanges

- Removing
- Remove appropriate rollover bar.
- Remove speaker assembly carrier.
- Remove bolts - 2 - (2x).
- Remove flange - 1 -.

- Installing

NOTE: - Arrow - points toward front of vehicle.

- Threaded hole faces rear when installing.
- Install bolts - 2 - halfway.
- Install roll bar.
- Tighten bolts - 2 -.
- Perform installation in reverse order of removal.

2 - Bolts (2x)
- Tightening torque 20 Nm