Wind Deflector Trim, Removing and Installing

Wind Deflector Trim, Removing And Installing







1 - Wind deflector trim
- Remove rear panel center trim
- Remove bolts - 3 - (2x) at roll bar cross member.
- Remove front convertible top compartment trim.
- Remove bolts - 2 - (4x).
- Disengage wind deflector trim - 1 - in center.
- Remove wind deflector trim - 1 - toward upper rear.
2 - Bolts (4x)
- Tightening torque 23 Nm
3 - Bolts (2x)
- Tightening torque 23 Nm