Procedures

Airbag Adapter VAS5094, Connecting







1 - Airbag adapter - igniter wire connector (2-pin)
- Connect igniter wire - 3 - from airbag module to connector - 5 - (airbag adapter).
- Disconnect connector on vehicles with heated seat.
- Fold back floor covering at rear around guide rail.
- Push seat backward out of guide.
- Lift seat out of vehicle.

CAUTION: Airbag adapter VAS 5094 must remain connected on seat until seat has been re-installed.

2 - Airbag adapter-Ground (GND) wire connector: Audi A6 1998, Audi A4 1995 and Audi A3 1997
3 - Igniter wire connector from airbag module
4 - Airbag adapter-Ground (GND) wire connector (Golf 1991)
5 - Airbag adapter-igniter wire connector (4-pin)