All Wheel Drive

ABS/ESP ITT Mark 60 system components on rear axle (vehicles with all wheel drive)
Exploded view





1. Speed sensor
^ Before inserting sensor, clean inner surface of hole and coat speed sensor all around with lubricant paste G 000 650
^ Replacing speed sensor wire
2. Hex socket head bolt - 8 Nm
3. Trailing arm
4. Backing plate
5. Bolt -10 Nm
6. Brake disc
7. Phillips-head screw
^ Tightening torque: Refer to specifications.
8. Wheel hub with rotor
^ Only replace complete
9. Circlip
10 Wheel bearing