With Manufacturer's Scan Tool

Throttle Valve Control Module -J338-, Checking

The following components are located in housing for throttle valve control module:
- Throttle drive (power accelerator actuation) - G186-. (This is an electric motor that is activated by ECM. This electric motor opens throttle valve against spring pressure.)
- Angle sensor -1- for throttle drive (power accelerator actuation) -G187-
- Angle sensor -2- for throttle drive (power accelerator actuation) -G188-

NOTE:
- The housing for throttle valve control module must not be opened.
- The angle sensors are designed as potentiometers (variable resistances). They communicate position of throttle valve to Engine Control Module (ECM) fully independent of each other.
- The potentiometers cannot be mechanically adjusted. Adjustment is performed in Basic Setting (function 04) using the VAS5051 tester Scan Tool.