Removing Operating Rod

Removing Operating Rod







1 - Actuator rod
- Remove seat.
- Detach backrest cover fabric from cover panel.
- Remove backrest upholstery (padding with cover).
- Remove backrest frame.
- Drill out rivets - 2 - (4x).
- Remove brackets - 3 -.
- Remove bearing shell - 4 -.
- Pull release lever - 5 - out 5 mm (both sides) and remove - 1 -.
2 - Rivets
3 - Bracket
- Long side faces down
4 - Bearing shell
5 - Release lever
6 - Support plate
7 - Bushing
- With collar (between actuator rod - 1 - and support plate - 6 -
8 - Washer
- Between actuator rod - 1 - and release lever - 5 -.