Cooling System Components, Removing and Installing

Cooling system components, removing and installing

WARNING: Cover cap of expansion tank with rag and open carefully, as hot steam i.e. hot coolant may escape when opening.

Note:
^ The cooling system is under pressure when the engine is warm. If necessary reduce pressure before repair.
^ Secure all hose connections using hose clamps appropriate for the model type; Refer to Parts Supplier
^ VAG 1921 hose clip pliers are recommended for installing spring-type clamps.
^ Always replace gaskets, seals and O-rings.
^ The arrows which are marked on coolant lines and hoses must face each other.