Cylinder Head, Removing and Installing

Cylinder head, removing and installing

Note:
^ Replace cylinder head bolts.
^ On assembly, replace self-locking nuts and bolts that are tightened by turning through to a specified angle, as well as oil seals and gaskets.
^ When installing an exchange cylinder head, the contact surfaces between supporting elements, roller rocker fingers and cams must be oiled before installing the head.
^ The plastic protectors fitted to protect the open valves must only be removed immediately before installing the cylinder head.
^ When installing a new cylinder head or cylinder head gasket, drain all of the old coolant and refill with new coolant.