Sealing Flanges and Flywheel, Removing and Installing

Sealing flanges and flywheel, removing and installing

Note: Secure the engine to an engine stand when performing assembly work.





1. 100 Nm + 90° (1/4 turn) further
^ Replace
^ Use counterhold T10069 to loosen and tighten
2. Vibration damper
3. 10 Nm
4. Oil seal
^ Replace
5. Front sealing flange
^ Coat sealing surfaces with sealing paste when installing
,Refer to Parts Supplier
6. Cylinder block
, Refer to Parts Supplier
8. Oil seal
9. Dual-mass flywheel
10. 60 Nm + 90° (1/4 turn) further
^ Replace
11. 23 Nm