Transmission Position Sensor/Switch: Service and Repair

Tiptronic switch -F189-, removing and installing
The tiptronic switch is integrated in the selector mechanism; it is therefore not possible to replace only the switch on its own.

Shift locks solenoid -N110- removing and installing
Removing
- Remove selector mechanism





- Disconnect connector - B - from Shift lock solenoid -N110-
- Press retaining tab - A - to rear and simultaneously turn solenoid in direction of arrow.
- Pull out shift lock solenoid.

Installing
Perform installation in reverse sequence of removal. Note the following:
For information on tightening torques of nuts and bolts as well as information on which nuts or bolts to replace.