Bevel Box, Refilling With New Gear Oil

Bevel box, refilling with new gear oil
Work sequence





- Remove plug - B - (Plug - B - must be replaced).
- Fill up gear oil for bevel box to lower edge of filler hole. Specification, Refer to Parts Supplier
- Screw in plug - B -
- Start engine, engage a gear and allow transmission to turn for approx. 2 minutes.
- Switch off engine and remove plug - B
- Fill gear oil for bevel box up to bottom edge of filler hole. Specification, Refer to Parts Supplier
- Screw in new plug - B





Component