Evaporative Emissions System: Service and Repair

Parts Of EVAP Canister System, Removing And Installing







1 Cover
- For EVAP canister
2 Vent line
- to Evaporative Emission (EVAP) Canister Purge Regulator Valve -N80-
3 Vent line
- from gravity valve and pressure retention valve at fuel tank
4 Sealing piece
5 EVAP canister
- Component location: Bottom of spare tire well
6 Vacuum line
- to Leak detection pump (LDP) -V144-
7 Bracket
- for air filter
8 Air filter
9 O-Rings
10 Evaporative Emission (EVAP) Canister Purge Solenoid Valve -N115-
11 Retaining ring
12 5 Nm
13 Bracket
- for Evaporative Emission (EVAP) Canister Purge Solenoid Valve -N115-
14 Electrical 2-pin harness connector
- Black
15 Socket
16 Rubber grommet
17 Stud bolt -16 Nm
18 Grommet
19 Washer
20 Cap nut -9 Nm