Attachment Bulletin # 910407
Group: 91Number: 04-07
Date: Apr. 20, 2004
Subject:
GeKo, Radio Code Retrieval Using VAS 5051
Model(s):
All with Fixed Radio Code 1990 > 2004
Supersedes T.B. Group 91 No. 04-06 dated Apr. 16, 2004 due to change in requirements section of bulletin.
Condition
Beginning April 1, 2004, retrieval of Audi Anti-theft radio security codes using WIN DCS is no longer possible. Retrieval of radio security codes must be performed using GeKo.
Requirements
^ VAS 5051 (with current software) equipped with Ethernet card, connected to Dealer's Local Area network (LAN) and high speed Internet access.
^ Operator must have GeKo user ID and password.
^ 14-character Radio serial number.
^ 17-character VIN.
Service
Note:
Only key 5051 display screens needed in the following procedure are Illustrated here. Follow all text prompts as indicated on each VAS 5051 screen.
- From Start-up screen, select "Guided Functions".
- Select brand "Audi".
- Select type "Previous models for immobilizer-Online".
- Select model year "All model years".
- Select version "All variants".
- Select engine code "All engine codes".
- From Confirm vehicle identification screen, select forward arrow ~ on navigation bar.
- Select vehicle system or function "Radio code -inquiry and system test'.
- Highlight vehicle system or function "Radio code, checking".
- Select forward arrow > twice on navigation bar.
- Read test description screen.
- Press "Done" button -arrow- to proceed with test.
- Select "Press here to display input keys".
- Enter VIN using input keys, then press "Q" button to confirm.
- Select forward arrow > on navigation bar.
- Select "Press here to display input keys".
- Enter Radio serial number using input keys, then press "Q" button to confirm.
- Select forward arrow > on navigation bar.
- Select "Press here to display input keys"
- Enter an "X" for the first and last name of customer using input keys, then press "Q" button to confirm.
Note:
Do not fill in any information requesting customer's personal information such as Name, Driver's License Number or Country of Citizenship.
- Select forward arrow > on navigation bar.
- Select "Press here to display input keys".
- Enter an "X" for customer's personal identification number using input keys, then press "Q" button to confirm.
- Select forward arrow > on navigation bar.
- Select "Press here to display input keys".
- Enter an "X" for the citizenship of customer using input keys, then press "Q" button to confirm.
- Select forward arrow > on navigation bar.
- Read Online-connection set-up screen.
- Press "Done" button -arrow- to proceed with set-up.
- Enter GeKo User ID and password.
- Press OK button.
^ The Online connection is now established, and all input data transmitted.
^ During this time, the tester screen displays various confirmation messages.
^ If any input data is incorrect, the tester will prompt the operator accordingly.
^ If all input data is recognized and accepted, a final message screen displays the 4-digit radio code.
- Record code.
- Refer to "Radio Code entry procedure" in appropriate Repair Manual, Communication, Repair Group 91.
Technical Support
Note:
The technical support contacts are for Audi dealership personnel only.