Engine and Transmission, Separating

Engine and transmission, separating

Special tools and equipment required





^ Workshop crane VAS 6100





^ Bracket T10013
^ Bolt M8 x 40 with nut and 30 mm diameter washer

Work sequence
^ Engine/transmission assembly removed and attached to engine bracket T101 02





^ Remove bolts -1- and -2- at bracket for bevel box and remove bracket.





^ Disconnect coolant hose at ATF cooler (arrow).





^ Remove circlip and remove pin from bracket T1001 3.
^ Secure bracket T1001 3 with bolt M8 x 40 and 30 mm diameter washer to transmission lifting eye.
^ Attach workshop crane VAS 6100 to bracket T1001 3.





^ Remove bolts -1...10- on engine/transmission flange.
^ Separate transmission from engine.