Ignition System Components

Ignition System Components, Removing And Installing







1 Ignition coils with output stages
- Cylinder 1 ignition coil 1 with output stage -N70-
- Cylinder 2 ignition coil 2 with output stage -N127-
- Cylinder 3 ignition coil 3 with output stage -N291-
- Cylinder 4 ignition coil 4 with output stage -N292-
- Cylinder 5 ignition coil 5 with output stage -N323-
- Cylinder 6 ignition coil 6 with output stage -N324-
2 4-pin connector
- For ignition coils with output stage
3 Bracket
- For connector for Knock Sensor 1 -G61-
4 Bolt, 10 Nm
5 3-pin connector
- Black
- With gold-plated contacts
6 Knock Sensor (KS) 1 -G61-
7 Bolt, 20 Nm
- To ensure correct operation of knock sensor, it is important to adhere to specified tightening torque
8 Camshaft adjuster
- Exhaust side
- With sender wheel for Camshaft Position sensor 2 -G163-
- After reinstalling, adjust valve timing
9 Cover (upper) for camshaft timing chain
10 Seal
- Replace
11 Camshaft Position (CMP) sensor -G163-
- For exhaust camshaft
12 Bolt, 10 Nm
13 3-pin connector
- Black
- With gold-plated contacts
- Mark before removing
14 Camshaft Position (CMP) sensor -G40-
- For intake camshaft
15 Knock Sensor (KS) 2 -G66-
16 2-pin connector
- Black
- With gold-plated contacts
17 Camshaft adjuster
- Intake side
- With sender wheel for Camshaft Position
- sensor -G40-
- After reinstalling, adjust valve timing
18 Spark plug
- Tighten to 30 Nm
19 Valve timing housing
- For variable valve timing