Automatically Shifted Manual Transmission/Transaxle: Locations

Component overview
1. Oil pan
2. Bolts M6
^ Always replace
^ 5 x, for securing oil pan with oil pan gasket to transmission housing
^ Tightening torque: 10 Nm
3. Gasket
4. Bolts M6
5. Direct Shift Gearbox (DSG) Mechatronic -J743-
6. Breather pipe
^ Pressed into transmission; must be replaced after removal
7. Breather cap
^ Attached to breather pipe
8. Gear oil cooler
9. M8 bolt
^ Always replace
^ For securing gear oil cooler to transmission housing
^ Tightening torque: 20 Nm + 90° further (90° is equivalent to a one quarter turn)
10 O-ring
11. Support bracket
12. M8 bolt
^ Always replace
^ 2 x, for securing support bracket to transmission housing
^ Tightening torque: 20 Nm + 90° further (90° is equivalent to a one quarter turn)
13. Filter housing
^ Tightening torque on transmission: 20 Nm
14. Gear oil filter
15. Gear oil pump
16. Bolts M6
17. Cover for gear oil pump
18. Bolts M6
19. Drain plug M24
20. Seal
21. Inspection plug M24
22. Seal
23. Overflow pipe
24. Protective shield





25. Bolt M10
^ 4 x, for securing protective shield to transmission housing
^ Tightening torque: 32 Nm
A Sensor for transmission RPM/Transmission fluid temperature sensor -G182-/-G93