Automatic Vertical Headlight Aim Control System, Layout

Automatic Vertical Headlight Aim Control System, Layout

CAUTION: Before beginning repairs on the electrical system:

- Obtain the anti-theft radio security code.
- Switch the ignition off.
- Disconnect the battery Ground (GND) strap.
- After reconnecting battery, re-code and check operation of anti-theft radio. Also check operation of clock and power windows according to Owner's Manual.

WARNING:
- HIGH VOLTAGE!
- Always disconnect battery Ground (GND) strap prior to servicing any parts of the HID lamp system marked with the yellow "HIGH VOLTAGE!"symbol.
- After disconnecting battery, briefly turn headlights on and off in order discharge any residual voltage.







1 - Headlights with High Intensity Gas Discharge (HID) Lamps
- With Headlight Beam Adjusting Motors - V48- & -V49-
2 - Left Front Level Control System Sensor - G78-
- Located at left front control arm of front axle
3 - Left rear level control system sensor - G76-
- Front-wheel drive: located at rear axle
- All-wheel drive: located at rear crossmember left
4 - Headlight Range Control Module -J431-
- Below rear seat bench