Lock Carrier Service Position

Lock carrier service position

Special tools, testers and auxiliary items required







- Support Tool 3369







- Remove bumper.







- Remove engine cover - 2 - and - 3 -.
- Unscrew intake air duct between lock carrier and air cleaner housing at lock carrier and remove.







- Install Support Tool 3369 at left and right as shown.
- Remove bolts - 5 - at left and right.
- Remove bolts - 4 - and pull lock carrier - 1 - toward front.
- Pull lock carrier forward until rear hole in lock carrier aligns with front threaded hole in fender flange.







- Secure lock carrier at left and right with bolts - arrow -.

Assembly is performed in the reverse order of removal.

Note: After assembly of lock carrier, check headlight positioning and adjust if necessary.